cnPilot E600 stay on top of the latest standards with the high-powered, Gigabit speed, beamforming, Multi-user MIMO (MU-MIMO) 802.11ac wave 2 e600 access point with a 4×4 antenna array. From the classroom to the mall, cnPilot ™ e600 Indoor is perfect for applications that demand high
capacity, range, and/or support high user density.
1.How to configure.
Step 1: Sign in cnMaestro. Go to AP Group > AP tab > Claim New AP.
Step 2: Enter serial number of the cnPilot E600 device. Click Claim Devices.
Step 3: Navigate to WLANs > New WLAN.
- Name: Enter name for WLAN.
- Description for WLAN.
- SSID: Enter name SSID. Click Enable.
- Security: You can configure use (WPA2 Pre-Shared Keys) or not to use (Open) a password for this SSID.
- Radio: Choose frequency 2.4GHz or 5GHz or both.
Step 4: Create AP Group. Assign WLANs to the AP Group.
Go to AP Group tab > click New AP Group.
- Name: Enter AP Groups.
- Country: Choose country.
Placement: Choose Indoor or Outdoor.
Click Add WLAN.
Select WLAN from the list. Click Add.
Step 5: Assign AP Group to the Access Point.
Go to Device tab > choose device AP. Ex: E600.
Choose Configuration tab.
Scroll down AP Group, choose AP Group you want.
Continue scroll down click Apply Configuration.
Test wifi with SSID after configure.